Tuesday, May 10, 2011

New mouth impressions, adjusting the Do Not Adjust appliance

10/20/11 I have just made a correction to my January 30, 2011 blog entry. The appliance is NOT called "Do Not Adjust". It is supposed to be called "Daytime-Nighttime Appliance™"

Monday they took a new set of upper & lower impressions plus a new impression of the bite registration so that the lab can make an appliance for my lower teeth. The new appliance ought to be ready in about 10 days.

The dentist spent some time bending the springs at the front of the appliance, as well as the wire that arches across in front of all the teeth. She also removed one spring- the one that relates to my farthest-forward canine tooth- because we don't want it to come any farther forward. In addition the arch wire now touches that tooth, to prevent it from moving farther forward. All that was done to assist getting my front teeth in line.

I am still to expand the anterior portion of the appliance on schedule, while leaving the lateral adjustment alone. The gap for the anterior plate is now visibly wider than the gap for the lateral plates.


 You can also see where one of the springs has been removed. There is a whitish area there now because in order to remove the spring, the dentist removed some of the acrylic it was anchored into. Then she mixed some new acrylic to re-fill the gap she created. Her repair acrylic was white.

Monday, May 2, 2011

Clarifications, Progress, and a New Phase

Clarifications: As it turns out, I indeed had a wrong impression in the previous blog entry (April 18 2011). We are not permanently finished expanding the appliance laterally. It is only a temporary halting. Her explanation of pleasant surprise was genuine, however. She said I have made unusually fast progress. The temporary halting of lateral expansion has been ordered so that we can allow other growth areas to 'catch up' with the lateral growth that has occurred.

Something else that can use some clarification: I had mentioned the 2mm lateral expansion that has occurred at the C5 position such that there is now a (self measured) 34mm gap between those molars (see December 19, 2010 and April 18, 2011 posts). However I learned today that in my case, since I had my premolars removed as a child, C5 as shown in the diagram is not necessarily my proper measuring position. Again, I say in my case. Others should not extrapolate what is correct for them in this regard. In the future, I will not report any self-measuring, and I will just rely on the doctor to measure and judge the growth.

Progress: While we have not increased the width of the appliance for a few weeks, we have continued to advance the fore (anterior) portion of the appliance once a week (today being one of those days), thus moving my front teeth ever so slightly more in line. Today the doctor took photos of my bite (revealing quite a mismatch between my uppers and lowers, since my uppers have moved so much by now). She is sending the photos to Dr. Singh, and has ordered that next week, we are going to take new impressions of the uppers and lowers. All of which leads us to......

A New Phase: It is no longer a matter of guessing. I will be getting a lower appliance. I don't know a thing about it yet, so I'm not going to speculate. But the overview is, as I understand it, that we must get the lower teeth to 'catch up' with the position of the uppers, just as we are currently getting the upper front teeth to catch up with the lateral expansion. There may be more lateral expansion of the uppers later, but we need to work on the lowers first, so that the bite does not become wildly mismatched in the process.

Monday, April 18, 2011

A Surprise (with a correction)

(Important- Note the correction I added four paragraphs down)

Let me preface this by explaining that there are two dentists at the dental practice I attend. Only one has her name on the shingle, but when I come in for an appointment I may get one or the other.  Both are knowledgeable about the DNA Appliance, and both have been involved in my case since the beginning.

Today I went in for a routine appointment. I expected to be checked for irritations, and to have the appliance adjusted (abraded/polished) accordingly. I didn't expect anything more than that.

The dentist who saw me  was one I had not seen the past couple of appointments. She asked to examine my bite (sans appliance) and exclaimed surprise. Her surprise was that I am "there" (her word). I don't mean she was surprised I was physically present. I mean my upper arch has expanded adequately (see previous blog entry) and we do not need to adjust the appliance width any farther. Apparently, the 2 mm gained that I mentioned in the previous post is about right for my mouth. She was surprised it happened as quickly as it did.

However the front teeth are still not where we want them to be. (See photo in April 9, 2011 blog entry)

(NOTE: I am adding a correction here 4/25/11. A sharp-eyed and seemingly knowledgeable reader has informed me that Dr. Singh recommends a 38mm gap at C5 (for Caucasians), whereas I measured myself at 34mm in the previous blog post. It now occurs to me there is a very good chance I simply misinterpreted my dentist's comment that I am "there". The same sharp-eyed reader comments it may just be time to advance the anterior (front) section of the appliance while temporarily halting advancing the width so the front can 'catch up'. Perhaps that is all that was meant when she said I was 'there'. I will try to get more clarity next visit. Meanwhile, keep in mind this blog entry may have been based on a faulty assumption on my part.)

She adjusted the appliance in the relevant axis 1/4 turn more (leaving the width alone), and made adjustments to the springs and wire arch in the front using pliers. In previous appointments these had been left alone. She stated that we now need to "activate" the front teeth to move into position.

My job will be to continue to adjust only the front triangular section once a week, while leaving the width as it is with the 2mm gap.  

She also made mention of a lower appliance to come later. Previously, it seemed a possibility, but by no means a certainty, that I would need a lower appliance.  Now I get the impression it's a lot more likely I will need it.

But all in all, I feel like a milestone has been achieved. And judging from the dentist's reaction, in a surprisingly short period of time.

Thursday, April 14, 2011

Well, SOMETHING is happening

In my December 19, 2010 post I reported that the gap between the molars at the C5 position was recorded by my dentist as 32mm.

I just made a homemade probe to measure that gap now. It is 34mm.

I also measure the midline gap in my appliance as it is now. 2mm.

Nothing ambiguous there.

Saturday, April 9, 2011

Progress at Nine Weeks

First of all, let me mention that if you are new to this blog, or are just skimming, there were a couple questions relating to the expense and comfort of the treatment that can be found in the "Comments" section of the previous blog entry. I will suggest reading them there rather than my repeating my replies here.

I have by now been back to see the dentist for brief appointments several times, sometimes at one week intervals, other times two week intervals. No problems have occurred, but she likes to check and recheck the appliance for comfortable and proper fit. She had slightly ground or polished areas of the appliance several times now, trying to perfect the fit and bite alignment according to her goals. Other than that things have gone uneventfully.

When the appliance was first given to me, it was two weeks before she made the next mechanical adjustment to start spreading the appliance. Later this was stepped up to weekly intervals. Then she allowed me to make the adjustments myself, after tutoring me what to do. How often the adjustments are made depends to an extent on how many hours a day one wears the appliance. I strive for a minimum of 12 hours a day, and usually end up achieving 14 hours or even a little more. The more I can wear it, the earlier the treatment can end.
As you can see by comparing to the picture in the previous blog entry, the appliance has clearly expanded, an indication of the bone growth that is occurring.


I don't have a proper way to gauge the gaps in the appliance, but it looks to me like they have increased in the 1-2 mm range. You can clearly see through the gaps now, whereas you could not when the appliance was new.

As to changes in my teeth, I believe I am seeing subtle changes. I do feel the overall arch of the uppers has widened a bit, as gauged by the way my tongue fits between the teeth. I also believe that my front teeth are coming forward- but just slightly. Almost impossible to see in a photo. I feel like my face is filling out just a bit. One might guess I have gained weight, though I haven't.  But again, it is very subtle, and difficult to see in a photo, especially with the poor photo quality of this webcam. But I will post the photos for readers to view and compare with the previous entries.

As to the lower teeth, I see no change at all as of yet- however this is supposed to be normal.


Changes in the relative alignment of the upper teeth are still quite subtle at this point. Can you see a difference compared to the "Fugly Truth" pictures?


I tried to make this photo as similar as possible to my blog profile photo which was taken November 2010. I think my face has slightly more filled out appearance now, though again, it is quite subtle. I wonder if it is detectable to readers?

Sunday, January 30, 2011

The DNA Appliance Has Just Arrived

It has well and truly begun. I received the appliance January 27, 2011 and have by now worn it three nights.

DNA Appliance in this instance stands for "Do Not Adjust" Appliance (*See correction below). There is some contradiction in terms here because you do in fact adjust the appliance periodically. I'm going to assume however they are using the term adjustment in the sense of orthodontic adjustments- like when people have traditional braces and go in for their monthly "adjustments" where the pressure on the teeth gets tightened. That is what they called it when I was a kid. And with the DNA Appliance you are not subject to that kind of adjustment.

Obviously "DNA Appliance" is also a catchy name for marketing purposes and serves to reinforce that it is coming from the field of Epigenetics. 

* 10/20/11 Correction: Apparently the information I received early this year about the name of the appliance is incorrect. It is NOT called "Do Not Adjust". DNA actually stands for "Daytime-Nighttime Appliance™"

 In the photo above note the Y-shaped divisions in the appliance. Note the metal device in the center. Periodically a small tool will be inserted into the metal device and the appliance will spread slightly at the lines of division. This will slightly spread the palate at the bony sutures (see previous blog post "What Is Epigenetic Orthodontics?"), and new bone will grow into the gap that was created, gradually reshaping the mouth.



In this second view we see what might be assumed to be a retaining wire across the front, such as found in traditional orthodontic retainers. But that is not the case. There is actually a substantial gap between my two front teeth and that wire. I believe the wire defines the position my teeth will be in by the time therapy is finished. Note also the ziggurat-like wires in the front. These are springy and touch the backs of the front teeth. However the pressure against the tooth is extremely slight and is hardly noticed.

I was instructed by the doctor that it is optimal to wear the appliance 16 hours a day. It is not necessary to wear it during working hours but should be worn otherwise. If I can achieve this optimal schedule, I should be finished with the therapy in a matter of months. If I cannot, it will extend the therapy perhaps to a year or more. I was also told that due to the timing of our natural biorhythms the bone cells we are trying to grow will not be active during work hours even if the appliance were to be in, so there is no reason to try and push it beyond the 16 hours/day.  In other words the cells will grow during the resting and sleeping periods, but not during times of high activity.

The appliance must be removed for eating, however.

Cleaning is to be done by rinsing and a denture-type soak. The DNA Appliance is not to be brushed.

More to follow in the next blog post.

Friday, December 24, 2010

The Fugly Truth

                                      THE 'Befores'
Ugly as hell, I know. And embarrassing to me. But in keeping with the purpose of the blog, I'm showing you what is what. This doesn't require much explanation. I just hope when this is all done, I'll be able to show something a little more attractive.




 

Sunday, December 19, 2010

What has been done to me so far

A reader  expressed that it wasn't clear whether I had actually begun treatment yet or not. As of this writing I have only been in preparation for treatment. First I was sent to a specialized dental imaging facility where both head scans and camera pictures were taken (full face, facial profile, chin raised, and the inside of my mouth, upper and lower). These were then sent on to Dr. Singh in Portland, Oregon. (I am receiving the treatment from my local dentist, but she is in consultation with Dr. Singh on all DNA Appliance related cases.)

Then a few days ago my dentist took impressions of my mouth and also made a measurement of the span of my upper dental arch (the arch-shape of rows of teeth) at the C5 position shown in this illustration: 


This span measured 32mm, but by the time treatment is concluded it should be wider.

Also a measurement of the width of my tongue was taken. It is 50mm at the same place where the teeth are only 32mm apart.

In addition to impressions of my teeth, another impression was taken of the space between my upper and lower teeth with the jaws in a relaxed position which she referred to as the phonetic gap. To achieve this, I was instructed to say the word "Mississippi" and to hold the position of my jaws that was created by the last syllable. The small gap between my upper and lower teeth was then gauged with a thin stick and I was instructed to bite down upon it while a molding paste was squirted into that gap. The paste set in about one minute and was then removed.

The doctor was scheduled to fly to Portland the following day to consult with Dr. Singh, and she would bring these impressions and measurements with her.

I was told by the doctor I would receive my DNA Appliance sometime in January.

What is Epigenetic Orthodontics?

I am only going to attempt a brief layman's explanation of Epigenetic Orthodontics here, which is simply my limited understanding of it. Googling the term will provide explanations more thorough and scientific for those seeking deeper knowledge.

I assume all readers know what standard orthodontics is. As we usually understand it, it is the technique of aligning teeth by forcing them into alignment using appliances or mechanical techniques (braces, Invisalign, etc)

Epigenetic orthodontics works differently, more subtly, and to my way of thinking, much more elegantly. It is based on the idea of activating bone stem cells that will grow into new bone tissue, thus changing the shape of the bones themselves in such a way that the teeth come into proper alignment naturally. (Stem cells are "generic starter cells" that do not yet have the characteristics of a particular type of body tissue, but will become a specific type of tissue, depending on where the stem cell is located in the body.)

In the photo above you can see lines that divide the bony plate of the upper palate. These lines are known as a sutures. There are many sutures in the skull such as can be seen in the illustration below.
The sutures are a very small gap between the bone plates, and they are where the bone stem cells exist. The sutures also allow a very small amount of movement between the plates. They are also where new bone growth occurs in a young growing body, and where new bone growth can occur in an adult body if the stem cells at the margins of the sutures become activated.


It was not known until recently that the adult stem cells at the margins of the sutures could be activated. It was always thought that once adulthood was reached, the bones stopped growing, the stem cells for the bones in the skull became dormant, and that, as they say, was that. You were stuck with what you had.

But we now know that the bone stem cells in the sutures of an adult can become active under special conditions and grow new bone. And if this new bone growth is directed in a planned and precise manner, it is then possible to achieve alterations of the shape and dimensions of the bones in such a way that the teeth will fall naturally into alignment, and/or that improvements in the airway can be achieved (eliminating snoring or sleep apnea), or that improvements to facial appearance can be achieved.

In Epigenetic Orthodontics, the sutures in the bone plate of the upper palate are of primary focus. The stem cells are activated by mechanical means- therefore no drugs or invasive techniques are involved. What has been discovered is that if the sutures can be spread just slightly more open, the dormant adult stem cells will "awaken" and produce new bone tissue at the site.

To achieve that  slight widening of the gap, an orthodontic appliance (Dr. Singh's  DNA Appliance) resembling an orthodontic retainer is worn. In order to direct the bone to grow in the desired manner to achieve the desired new shape, the appliance is outfitted with spring-like extensions that will place small  amounts of tension in specified ways against specified teeth. Which teeth are targeted depends on the patient's needs. This slight tension creates the signal to the stem cells in certain regions of the suture to become active and produce bone at the specific sites the doctor desires the bone to grow and the plate to expand.

And if the above weren't already interesting and exciting enough consider this: In expanding/reshaping the upper jaw (properly called the Maxilla), the lower jaw (AKA Mandible) also often follows into proper shape without the necessity of its own appliance. (I do not yet understand how that works but hope to learn.) Thus, both top and bottom teeth become aligned by using an appliance worn only on the top. However, I am told this is not always the case and that some patients will need to have an appliance made for their lower teeth as well.

Consider this as well: Since you are growing new bone, your improvements should last a lifetime- unlike, say, the braces I had as a kid, and from which I have suffered a gradual relapse such that I need orthodontia yet again, in middle age.

Wednesday, November 24, 2010

The Purpose Of This Blog

November 24, 2010

In preface to stating the purpose of this blog, please allow me to set the stage: I am a 55 year old man as of this writing. I am in need of orthodontic work. I had braces as a child, but as the years have progressed, my mouth has regressed. My teeth have gradually again become overcrowded, angled inward, crooked, and overlapping in places. The space in my mouth has been reduced such that my tongue now constantly touches the back of my top front teeth. This all can be expected to get worse as the years progress and middle age leads into old age. My dentist previously recommended the Invisalign system however I had already spent my dental budget for the year and was saving money to get Invisalign sometime in 2011.

I was at my dentist's offices in November 2010 for a cleaning and checkup. I spoke with my dentist, mentioning I was looking toward finally beginning Invisalign in the coming year. However, she was very enthusiastic about a new form of orthodontia called Epigenetic Orthodontics (let's shorten that to EO) which utilizes a dental appliance called the DNA Appliance (both of which will be described in fuller detail in following blog entries.) I am not a scientist, but have a fair layman's understanding across a range of scientific subjects, and was very interested and excited about the principals of EO, which involves the activation of bone stem cells to grow and shape the upper and lower jaw bones in a manner that is controlled by the DNA Appliance, thus reshaping your mouth via bone growth and allowing your teeth to naturally move back into alignment.

But I needed some time to research and think about it before committing to it, as well as needing time figure out how to finance it.

And so I lead into the purpose of this blog: While I was able to find a large number of academic and research citations as well as plenty of good material from the inventor of the process (Dr. Dave Singh), I could not find anecdotal experiences from patients. (I'm assuming this is because these methods are just too new.) So I thought I could perhaps be of some service to other people who, like myself, are searching the internet for real-life patient anecdotes relating to Epigenetic Orthodontics and Dr. Singh's DNA Appliance.

In this blog, I am beginning before the very first procedure or treatment. As treatment progresses, I will attempt to update and explain things. Hopefully, some people who are potential EO patients will find this of value in their own search for knowledge on this subject.

I think it is important to add that readers need to remember that what I write will be strictly my thoughts as a patient and layperson. I am not a scientist or doctor or an authority of any kind on Epigenetic Orthodontics or the DNA Appliance. I can offer my thoughts, experiences, and what I believe to be true but there will always be the possibility I have misunderstood or unknowingly misrepresented something.

Thus,  please do not consider this blog a source of scientific, dental, or orthodontic facts. I will try to convey what I think is factual, but if any factual details are especially important to you, please use due diligence and check them via scientifically or medically authoritative sources.